Proximity Sensor - 8 mm Diameter, Shielded, Normally Closed - NPN Controls and turns Off when metal

and turns Off when metal enters the sensing field

This kit is for SmartPAC 2 with a date code (serial number) 1238XXXX or higher

*Input for setup mode (optional) This mode allows the machine to be cycled during setup and troubleshooting while maintaining the current downtime reason and without incrementing the parts count

and Z directions Degree of protection IEC 60529 IP67

self-powered

Proximity Sensor - 8 mm Diameter, Shielded, Normally Closed - NPN Controls and turns Off when metalWintrss's 8 mm diameter shielded inductive proximity sensors are extremely useful general purpose die protection sensors. This sensor has a threaded housing, and should be secured into an M8 x 1 threaded hole with thread locker. If the sensor is to be removed from the die during maintenance, epoxy it into a removable bushing or insert. This inductive proximity sensor is Normally Closed, in other words, it actuates when metal leaves the sensing field,